forum.directupdate.net

miki

Nice to meet you again willy :) ... I have found the update only now ... :( I never got the problem with "crashing the engine at startup" but I have upgraded my version ;) I like installer with x86 and x64, but I have Two little note: - an error during installation procedure: when I click ...

miki

Hi Beardie,

thy to contact the author --> http://www.directupdate.net/support.html

Regards

Miki

miki

I use with XP Pro SP3 without any problem.

Regards

Miki

miki

Your question is incomplete, please more details

Regards

Miki

miki

From the Help file:

Extra info: Some dynamic dns provider require some extra information. Use these 2 fields to specify such information. Please refer to the provider support page to get specific details.

Regards

Miki

miki

Hi Stefan,

the same error code is on this post: http://forum.directupdate.net/viewtopic.php?f=2&t=77
Try to disable the first IP detection ...

Regards

Miki

miki

The icon is this exe file: DUControl.exe You can run it from DirectUpdate v4 install folder or from program menu (DirectUpdate control) When started, right click and press "Startup settings..." and check the DirectUpdate control options: Launch DirectUpdate control at startup Launch Direct...

miki

Not yet ... because it's not a general problem, only specific cases.
Example: in my XP Pro works good

Regards

Miki

miki

Welcome back DirectUpdate

Miki

PS: wrong month on the title 03/26/2008 - 03/05/2008

miki

[INF]- 13/Feb/2008 12:26:34 - Account "ZoneEdit" updating with IP 70.239.97.201... [DBG]- 13/Feb/2008 12:26:37 - Account update: update ended with ret=0x81830067 [ERR]- 13/Feb/2008 12:26:37 - Account "ZoneEdit" update failed. - Error 0x81830067:A valid Domain Name was not provid...

miki

Check the error log to be sure it's the same problem

Regards

Miki

miki

Enable the error and debug log, post here and someone let you know if there are know solutions.

Regards

Miki

miki

Not yet ...

But it's a problem in some system, because in my Win XP Pro works good

Miki

miki

it is not yet solved ...

Regards

Miki

miki

Is the bug in 4.62 fixed yet? It made my email server stop working and 44 people lost their email for more than 29 hours while I was on vacation. How can we prevent this from happening again? Bikini Browser The bug is reported here: http://forum.directupdate.net/viewtopic.php?p=3231#3231 and it is ...

miki

Problem like here: DU 4.6.2 engine stops Hi, It's a bug in the 4.6.2 engine. Sorry about that. While I'm working on it, the only workaround is downgrading to the 4.6.1: http://www.directupdate.net/download/DUSetup461.zip Regards William FYI: I run version 4.6.2 on my XP Pro without any problem Regar...

miki

FYI: I run version 4.6.2 on my XP Pro without any problem

Regards

Miki

miki

Check your log files, the solution could be found in log or debug log

Remember to enable the complete log options: Success / Error / Warning / Info / Debug

Regards

Miki

miki

Never got problem with my registration ...
I could suggest you to contact the DirectUpdate support:
http://www.directupdate.net/support.html

Regards

Miki

miki

Upgrade now to version 4.6.2 and works good

Thanks

Miki

* DirectUpdate v[4].[6].[2],
* build [177], [x]registered
* http://michele.beriola.it/
* DirectUpdate in italiano

miki

mmm

Do you have an extended description for this error?
The information are really poor, check the event viewer

Regards

miki

Please remember that this month (August) it's the Holidays Month and
should be possible that support is not active ...

Regards

Miki

miki

If you need support, check the details in this page:

http://www.directupdate.net/support.html

Regards

Miki

miki

Ok, waiting the next minor release

Miki

miki

What type of detection you use in the first where you have the error?

miki

The same as the other post: enable the complete log options: Success / Error / Warning / Info / Debug and post the log here, so we can see where is the problem with "update process"

Miki

miki

Please use the search option on the forum and read this post:

0x81830072

And enable the complete log options: Success / Error / Warning / Info / Debug

So we can see where is the problem with "IP address is invalid"

Miki

miki

Not sure to understand your problem ...

Can you give more detailed infos?

Regards

Miki

miki

A little human error could block a program ... it's normal

Happy to see now your DU working good

Bye

Miki

miki

this is wrong, click F1 on this windows and
should appear the manual with a screen like this:

The SMTP Server should be smtpauth.earthlink.net :587
why you have put the @ ?

Regards

Miki

miki

The host is not found ... are you sure to set the right host?
What is the exact value you can read in the line SMTP Server?

Regards

Miki

miki

After weeks of test and debug is available the version 4.5.1
with new features and bug fix

Version 4.5.1 is now available!

Miki

miki

Nice solution

Regards

Miki

miki

I think should be the same for x32

Engine --> IP Detections --> select your IP Detection
than you can see the IP detection name
and below you can see Disable/ignore this detection
and below again you can see Assume a new IP is valid after X detection(s).

Regards

Miki

miki

I suppose this is your DSL Modem: USB/Ethernet DSL Modem with Routing Capabilities Support page for GT701 I have take a look into manual and you have right: SNMP not supported and nothing about how detect wan IP And you cannot add the Router URL status page, because is password protected. If the rou...

miki

Really good you have fixed the problem yourself.

Regards

Miki

miki

I dont apply any changes, the strange is that DU and the DNS (Simple DNS PLus) are running on the same computer. This shuld not be a problem ... Only few of the domains works ok, and if I erease a register that is not working (time out) it starts to work fine. In this case I think that when you rec...

miki

Hello igotregistered,

please post here the error log (remember to enable the Debug log option)
Post here the DU version and others informations could help to understand the problem.

Regards

Miki

miki

Error 0x81840002:Operation timed out means that the remote server you have configured in the account was not reachable within 60seconds (default timeout in DU). All accounts have the Error 0x81840002:Operation timed out and this could be a connection problem in DU ... Do you change something in conf...

miki

Hello armandarus,

please post here the log (remember to enable the Debug log option)
Post here the DU version and others informations could help to understand the problem.

Regards

Miki

miki

Hello Cuajinais,

yes, the log is right ... but enable the Debug log option
so more info will be available to understand your problem

Regards

Miki

PS: from now and for a week I will be away for a little holiday in mountain and I couldn't reply in next days

miki

Updated the RegisterFly dns service plug-in

But wait the minor release 4.5.1

Miki

miki

Post here the error log

Regards

Miki

miki

Updated the RegisterFly dns service plug-in

But wait the minor release 4.5.1

Miki

miki

...

do you change something in configuration?
or a new firewall policy?

Miki

miki

Post here the error log or the dump file

Regards

Miki

miki

Edit your post and delete immediately your REG CODE and read here:

Small bug detected (and fixed) - A minor release (4.5.1) will be available soon

Miki

miki

Read here:

Small bug detected (and fixed) - A minor release (4.5.1) will be available soon

Miki

miki

I don't have a reply for you ... only the workaround to get DU working.
I think willy could help you to understand if it's a DU problem or your Router/Firewall problem, but you should provide more detailed informations.

Regards

Miki

miki

Do you have enable update with secure protocol?
Try to disable it and check again.

Anoter user found a problem due to a misconfiguration on the upstream firewall/proxy which corrupted some HTTPS connections

Regards

Miki

miki

Hi William Same error with no-ip: An account update failed. Account name: pesrv1.no-ip.org Current IP address: 84.73.222.190 New IP address (detected): 84.73.222.190 Error: The token supplied to the function is invalid - 0x80090308 ----------------------------------------------- Message generated: ...

miki

We'll wait

Let we know when there is a beta available, so we can help you to test it

Regards

Miki

miki

unable to understand ...

Babelfish translate, but I cannot understand:

precise that this program gere an IP fixo for each roteador computer pois tenho and ele naum deixa to gerar IP fixo
how can do

please use english language

Miki

miki

yes Steffen, you have right ... with vcredist_x86.exe the SideBySide error in event viewer don't appear,
but it's a workaround and I think willy will fix it in next release

Miki

miki

Yes, but at moment no solutions available ... only the workarond

Miki

miki

I really don't understand your question ...

This problem is related to DU ?

Miki

miki

Hi Hanjo, it's important disable the automatic DNS update and enable the Debug logs.
It's important to have the debug log when the CPU goes to 100% and
see the exact point it appen

Miki

miki

Send the complete report to the email address you have wrote.

Regards

Miki

miki

I have no idea ... sorry

Miki

miki

I had a similar problem with version 4.1.0 but it's solved with 4.1.2 In my PC was the SAME problem with CPU (impossible to kill or close) the PC restart was the only solution. This problem occurs only when the service try to update the IP address; you can do a test: disable all "DNS accounts" and t...

miki

you are behind a router or a firewall?
you have actvated the Windows XP firewall?

Check the DU log to see any error or post here.
without others information should be impossible to help you

Regards

Miki

miki

i got 'recipient not found' the first time i tried, off the email willynt@directupdate.net. I think there is a little problem with the secondary MX: E-mail Tester results for willynt<at>directupdate.net relay.directupdate.net. - 217.117.159.83 [Successful connect: Got a good response [250 <willynt@...

miki

Please report with error log or any info available.

I cannot try on x64 system, but without logs it's impossible to understand the error ...

Regards

Miki

miki

Thanks ddp for this workaround, but I'll wait a final fix from william

Regards

Miki

miki

Start a new post with your error log and detailed report.

And the 3 error record in event viewer there are only when you open the admin console.

Regards

Miki

miki

Should be a single error ...
You are the first with this error in forum

Miki

miki

Very good info steffen, I think should be important for William.

Regards

Miki

miki

In some rare and particular condition, the version 4.1.0 could create error or problems
My suggestion is a rool back to 4.0.5 and wait the next 4.1.1 version

Regards

Miki

miki

Check the "event viewer" --> "application" and read the error log.

Here should be wrote the error

Regards

Miki

miki

I think you could try the new detection IP that is available in last 4.1.0 Try this steps: - go to IP Detections - Create a new detection... - enable only the " 4 - Use remote web site(s) " - uncheck all selected and select only a string that start with smtp:// (ie smtp://outmail.f2s.com) - this sho...

miki

In this days William is out of office.

Out of office till monday 6th February

I think the new build will be available soon

Bye

Miki

miki

Yes, I confirm this little problem and this is a reply from William: Apparently, the errors in the EventViewer are not really meaningful/important and can be safely ignored (although I'll try to remove it ). and 2 days ago: Errors in EventViewer are still under heavy investigations Regards Michele

miki

Simple:

Detection <1 (From 3.6)> requested too soon. No listed remote web sites available that have not been used in the last 10 minutes (minimum time required between checks at any given site).

Change the update time with a time over 10 minutes

Miki

miki

In Italy official come out the 10 November:

Technical Conference 2005

Miki

miki

29 july ... before holiday

it's passed only september

Miki

miki

As it's wrote in this post:

Some news...

is in development

Miki

miki

I think you need to configur it under your web server ...

Miki

miki

Do you have enable it under "Actions" ?

Do you have check the logs to see if there are some errors?

Bye

Miki

miki

Check your "Dump" folder and paste the complete error log: --> DirectUpdate\Dump\ --> account1.html (open with notepad and paste the lines) <!-- URL: https://accout-name:*****@members.dyndns.org/nic/update?system=dyndns&hostname=accout-name%2Edyndns%2Eorg&myip=xx%2Exx%2Exx%2Exxx&mx=&...

miki

Check in forum before write new post:

[url=http://forum.directupdate.net/viewtopic.php?t=31&highlight=0x8183007a]0x80070005:Access is denied
[/url]

Miki

miki

Check in forum, before write new post:

DNS Accounts

Miki

miki

don't write 2 time the same problem ...

Are you sure you have entered the right data in config ?

Check your folder --> C:\Program Files\DirectUpdate\Dump

and search for SMTP.txt

Report here.

Miki

miki

Check the DU's windows log and report the [ERR]

Miki

miki

Sorry, but at this point I don't have others ideas

Miki

miki

But which version of DU are you using ?

Miki

miki

I don't know ... but there are some post with problem/issue/config for this dns service.

Do you have read others posts?

Miki

miki

mmm ... I don't understand

- what dyndns are you using ?

- are you sure is not a problem with your router settings ?

Miki

miki

or you have enable the IP detection using the "local network interface" and is not right configured ...

Miki

miki

Are you using secure connection to update your IP? Try to disable it (if enable) I think you are using one of this dyndns services: 2MyDNS.dud ConstantTime.dud DNIP.NET.dud dnsArt.com.dud DSLReports.dud DtDNS.dud EyeP.net.dud Gradwell.com.dud IPUpdater.dud No-ip.dud RegFish.com.dud SiteLutions.dud T...

miki

de nada

Miki

miki

1? for the error in "Default IP detection" failed using URL see here: 0x80070005:Access is denied 2? for the error in "Default IP detection" plugin "SNMP IP detection" failed. I don't have a reply :( 3? for the error in Error while executing command "SET". I think you have to check permission to the...

miki

As is wrote in manual: 4. Remote web sites. This step is the default step used. It's a list of URL, returning your IP address in a web page. For server bandwidth reasons, each server can't be queried more than every 10min. If the server is local (like a local router), then this limitation does not a...

miki

Post more log for this error

Bye

Miki

miki

Sure, you have to change the time of "Check IP every".
Set this time to 660 seconds and try again.

Bye

Miki

miki

From this log I can see only that you have the check every 2 minutes ...

Enable the complete log options: Success / Error / Warning / Info / Debug

So we can see where is the problem with "IP address is invalid"

Miki

miki

Good luck and let we know your progress

Miki

miki

Not easy to understand with low informations ...

Should be a problem in "IP Detections" or in "DNS accounts"

There are other logs before this error line?

Miki

miki

Thanks for the reply. I have posted my ipconfig here: http://www.jaywest.com/ipconfig.gif It only seems to be detecting one IP address. mmm ... only the "private" IP (192.168.1.2) and there aren't the public IPs Are you connected with a router? I'm interested in your suggestion of using https port ...

miki

Both IPs are dynamic. Currently I only have one LAN adapter which could be the problem. yes, should be the problem ... Try this: - open a dos windows - type "ipconfig /all" - report here the result A question: how do you see the IP you are using? Ultimately what I am trying to do is run both Apache...

miki

I think it's a strange situation ...

- the IP are statics or dynamics?
- you have a "cable provider" and how many lan adapter you have?

Miki

miki

Copy here logs with error.

Miki

miki

Very easy: it's a new feature of version 4 :lol: Export/Import settings to/from file. What's new in 4.0 Final: Supports many IP (via different IP detection methods). Rewritten and enhanced IP detection (including SNMP). IP detection methods can be added via plug-ins. DNS services are now implemented...

miki

Check the logs and report here the error.

Miki

miki

Check your "Dump" folder and paste the complete error log: --> DirectUpdate\Dump\ --> account1.html (open with notepad and paste the lines) <!-- URL: https://accout-name:*****@members.dyndns.org/nic/update?system=dyndns&hostname=accout-name%2Edyndns%2Eorg&myip=xx%2Exx%2Exx%2Exxx&mx=&...

miki

I use version 4.0.4 with DynDNS and Secure Protocol without any problem ...

Try to update and check again

Miki

miki

We need more info to understand the problem ...

DU version and all actions for this problem

Miki

miki

[INF]- 14/Jun/2005 09:39:03 - Sending email DirectUpdate - Test... [ERR]- 14/Jun/2005 09:39:03 - Email 'DirectUpdate - Test' failed. SMTP Error is 500 - 5.5.1 Command unrecognized: "AUTH LOGIN" (cmd=AUTH) - Error 0x81840078:SMTP Server returned an error. [DBG]- 14/Jun/2005 09:39:03 - Executed actio...

miki

This is strange, because DU run as service and it should start without login to PC ...

Are you sure to do correct settings?

Miki

miki

I don't know ...

I think you can wait an opinion by willynt

Miki

miki

Do you have the log for this error? Post here the log, so we can see the error You must have all log enable and you can see linees like this: [INF]- 27/May/2005 14:25:14 - Sending email DirectUpdate - Test... [SCS]- 27/May/2005 14:25:15 - Email 'DirectUpdate - Test' successfully sent to <xxxxxxxxx@x...

miki

Read this post by willynt:

0x80070005:Access is denied

Bye

Miki

miki

I think you could try to change the service account properties ...
The default setting is as "Local System" and you can change with an admin account.

Or you can try to use this external tools:

PsShutdown

Miki

miki

I don't have a server OS, but I think you could try DU without problem in your SBS2003. After the trial period you should buy a Pro license (not a standard): Hello, For now, the 4.0.3 version will technically work on a "server" OS, but it's in violation of with th license. And in a next version, "st...

miki

Hi saimen

Take a look to this topic:

diff b/w Prof & Std lic.

Bye

Miki

miki

Hi RipClaw Check the F.A.Q. 28. What are the differences between the "standard" and the "professional" version ? It's the same code. So, there is only one version to download. Then, the difference is made according to the serial number used. You need a "Professional" license when: You use DirectUpda...

forum.directupdate.net

Search found 115 matches

Re: 4.6.3 beta available

Re: DU 4.6.2 engine stops

Re: DU 4.6.2 engine stops

Re: ZoneEdit Wildcard

Re: Extra Info Fields

Re: DirectUpdate crashing

Re: DU 4.6.2 icon missing in System Tray

Re: Here is a "CHUNK" of my logfile.....

Re: Is the bug fixed yet?

Re: failed SMTP connection